PCB Mount DC Line EMI Filter For Conducted Noise in 5G Edge Gateways

Nov 20, 2026 Leave a message

Demand for 5G edge gateways and industrial IIoT equipment keeps growing. Communication boards, industrial PCs and embedded hardware are continuously miniaturized with higher power density, making on-board DC-DC power supplies widely adopted. Conducted common-mode and differential-mode noise from switching power supplies often causes export products to fail EMC tests. Many projects get delayed for 2–4 weeks due to EMC rework.

High-density boards impose stricter requirements on PCB space, SMT mass production and temperature resistance. Traditional discrete LC circuits and chassis external filters struggle to meet such demands. The SHINHOM PCB Mount DC Line EMI Filter delivers an efficient solution for board-level EMC troubleshooting. It features three core design highlights: near-source on-board filtering, simultaneous suppression of common-mode and differential-mode noise, and stable performance across a wide temperature range. The following content compares the weaknesses of conventional solutions and introduces the strengths of this filter.

 

Why are traditional filtering solutions becoming less viable for high-density circuit boards?

With limited PCB space and high operating temperatures inside enclosures, discrete LC circuits and chassis-mounted filters suffer from three major drawbacks:

  • Bottleneck 1: Layout-sensitive and poor mass-production consistency Discrete LC networks require repeated tuning. Filtering performance is heavily affected by PCB routing. Passive components may show batch deviations up to ±20%. Extending traces by merely 10 mm can raise noise by 6~12 dB within 20–50 MHz, frequently resulting in test failures and unstable mass production. The DLF75L05 integrates a complete filter network and is pre-calibrated at factory, eliminating extra tuning work.
  • Bottleneck 2: Long leads trigger secondary noise coupling Chassis filters come with long power wires. Unfiltered traces tend to pick up high-frequency noise. The root cause is that filter components sit far away from DC-DC noise sources. PCB-direct-mount filters can be placed right next to power ports to shorten unfiltered traces.
  • Bottleneck 3: Complicated assembly, incompatible with automated SMT lines Chassis filters demand cutouts, fasteners and wiring, leading to high labor cost. Discrete LC designs involve numerous separate components and mounting pads, which raise BOM and placement expenses.

Customer using a self-checkout kiosk in a retail store, representing reliable industrial control hardware and EMC filtering requirements.

Mandatory Requirements for Filter Components Driven by High-Density Board Trends

Against the bottlenecks outlined above, hardware developers in communications and industrial control sectors set three hard requirements for DC-line EMI filters:

  • Comprehensive filtering capability: suppress both common-mode and differential-mode noise, covering conducted interference generated by DC-DC switching circuits
  • Compact-layout friendly: SMT PCB mounting with standard package, compatible with SMT production lines and requiring no extra space outside the enclosure
  • Stable and reliable over wide temperature range: tolerant to high temperature inside cabinets, with no obvious degradation of filtering performance across the full operating temperature range

 

Product Advantages: How SHINHOM DLF75L05 Delivers Precise Matching

  • Advantage 1: Integrated common-mode + differential-mode filter network to simplify schematic design A single component suppresses both common-mode and differential-mode power noise, cutting down BOM count. Rated for 0–75VDC and 5A, suitable for most input and output buses of on-board DC-DC converters. Standard footprint of 25.4×25.4×10.2 mm. It can be adopted directly for revised projects without reworking PCB footprint. Backed by over 30 years of SHINHOM's expertise in magnetic components and EMI filter OEM service, each unit is strictly calibrated before delivery to guarantee consistent performance in mass production.
  • Advantage 2: Nearby PCB mounting with stable wide-temperature performance for enclosed cabinet applications Operating temperature: -40℃ ~ +120℃; Storage temperature: -55℃ ~ +125℃. Filtering performance remains stable under high temperature and full load. On-board SMT design. No cabinet cutouts or external leads required, lowering structural design workload. Fast sample delivery available. Our EMC engineering team can assist with PCB layout evaluation.
  • Advantage 3: Full compliance for overseas export projects RoHS compliant. The factory holds ISO9001, TL9001, ISO14001, QS9000 and OHSAS18001 management system certifications. Complete compliance documents can be provided promptly to reduce certification risks for European and American export projects.

Outdoor 5G edge base station cabinet operating in an urban environment, representing reliable communication hardware and EMI filtering requirements.

Application Scenario

Application Scenarios Pain Points of Traditional Solutions Capabilities of SHINHOM DLF75L05 Core Customer Benefits
Communication Equipment Boards Limited PCB space; long tuning cycle for discrete LC circuits Integrated common-mode & differential-mode filtering; direct PCB mounting; standard footprint Shorten EMC tuning cycle and avoid layout coupling risks
Edge Industrial PCs & Embedded Motherboards Long-term high-temperature operation; severe temperature drift of discrete components Stable performance from -40℃ to +120℃ with good batch consistency Reduce on-site EMC failures and after-sales rework risks
Supporting On-board DC-DC Power Modules Inherent excessive noise from power modules; demand for fast rectification Near-source filtering to shorten unfiltered traces for fast solution verification Enable prototype quick compliance and secure project schedules
Export-oriented Industrial Control Hardware RoHS and system compliance documents required for certification RoHS compliant; full factory quality system documentation available Simplify export certification document preparation and cut compliance risks

 

Conclusion

The trend toward higher‑density hardware for industrial control and communications essentially presents a comprehensive challenge: balancing power capability, thermal dissipation and EMC compliance within shrinking physical space. Solutions relying on repeated tuning of discrete components can hardly keep pace with fast‑track mass‑production and overseas‑export project timelines.

The SHINHOM DLF75L05 direct‑PCB‑mount DC EMI filter addresses market trends with three core strengths:

  • Integrated common‑mode and differential‑mode filter network that simplifies power‑supply EMC design with one single component
  • SMT PCB mounting in standard package, compatible with automated SMT manufacturing and space‑constrained layouts
  • Stable performance across ‑40℃~+120℃ operating temperature range and RoHS compliance. Backed by over 30‑year OEM manufacturing experience, it ensures consistent long‑term delivery for export‑oriented communications and industrial‑control projects.

This product is widely applied in 5G‑related communication boards, edge industrial PCs, embedded acquisition devices and various on‑board DC‑DC power systems.

→ Download datasheet for insertion‑loss curves and layout recommendations (PDF) 【Download Link】

→ Submit your requirements including bus voltage, rated current, PCB layout and operating‑temperature conditions. Sample support will be available within 3‑5 working days 【Inquiry Link】

 

📧 Email: sales@shinhom.com

🌐 Official website: https://www.shinhom.com/

 

Send Inquiry

whatsapp

Phone

E-mail

Inquiry