News & Events
-
16
Nov
Frequency, Standing Waves And Intermodulation: The Three Key Performance Indi...After a test bench completed calibration, the test data for an entire batch of RF modules showed a systematic shift. After several days of investigation, the root cause pointed to the attenuator: V...
Read More -
13
Nov
SHINHOM Concludes Enlit Europe 2026 Showcase in ViennaShinhom wrapped up a successful exhibition at Enlit Europe 2026 in Vienna, showcasing advanced power inductors, transformers, and sensors for the global energy transition.
Read More -
13
Nov
How D-SUB Filtered Connectors Address The Challenges Of Diverse I/O ConnectionsA medical monitor during EMC testing repeatedly exceeded conducted emission limits on its signal cables in the 30MHz to 100MHz band. Engineers tried adding ferrite rings and adjusting the PCB layou...
Read More -
11
Nov
How Do Coaxial Isolators Ensure The Reliability Of High-frequency, High-power...A radar power amplifier module had two PA transistors burn out in succession during testing. The engineers checked the power supply and thermal design, and finally traced the problem to load mismat...
Read More -
09
Nov
How To Select A Common-Mode Choke Core? A Comprehensive Analysis Of Permeabil...A communication interface device repeatedly failed EMC testing due to excessive common-mode noise in the 150kHz to 30MHz band. Engineers checked the Y capacitors and PCB layout, and finally traced ...
Read More -
06
Nov
Amid The Trend Towards Higher Frequencies in Switch-mode Power Supplies: How ...A communication power supply during full-load testing exhibited MOSFET switching losses 30% higher than expected due to reverse recovery spikes from the output rectifier. Engineers checked the gate...
Read More -
04
Nov
New Isolated DC‑DC Power Module With 4:1 Ultra‑wide Input For Industrial & Te...An industrial instrument starts up at an outdoor site at -40°C, and the supply voltage drops from 24V to 9V. Can the power module deliver a stable output within 1ms? This is not a hypothetical scen...
Read More -
02
Nov
The Boom in Drones And Unmanned Systems: How Does The HFD2101-2 Tackle The Ch...In the navigation systems of drones, unmanned surface vessels, and ground unmanned platforms, GNSS receivers perform the core task of providing position, velocity, and time information. However, th...
Read More -
30
Oct
From Vending Machines To Smart Door Locks: How Do Open-frame Solenoids Meet D...In automated equipment, smart locks, and vending machines, solenoids are the core actuating components for push-pull, locking, and dispensing actions. These applications require fast response, long...
Read More -
28
Oct
How To Select Inductors For New Energy Power Supplies? A Comprehensive Analys...New energy vehicles and renewable energy generation are reshaping the power electronics industry at an unprecedented pace – EV charging station power is advancing from 60kW to over 350kW, and photo...
Read More -
26
Oct
Given The Trend Towards Keyless Car Systems And The Miniaturisation Of Compon...In automotive keyless entry and industrial asset tracking systems, the reading reliability of RFID/NFC transponder coils directly determines whether the system can operate stably – when a key fob i...
Read More -
23
Oct
How Do Toroidal Chokes Meet The Dual Requirements Of High Current And Low Mag...In switching power supplies DC-DC converters, and EMI filtering circuits, power inductors directly affect system efficiency, electromagnetic compatibility, and reliability. Traditional drum cores u...
Read More




