In the navigation systems of drones, unmanned surface vessels, and ground unmanned platforms, GNSS receivers perform the core task of providing position, velocity, and time information. However, the real-world electromagnetic environment is far more complex than the laboratory – broadband noise, narrowband interference, pulse signals, and swept-frequency interference can all cause conventional GNSS receivers to lose satellite signals, leading to positioning drift or even complete failure. For unmanned platforms that rely on GNSS navigation, loss of positioning means mission interruption and, in severe cases, can cause the platform to lose control.
The limitations of conventional GNSS receivers in anti-jamming capability are precisely what the HFD2101-2 Integrated Anti-Jamming Receiver is designed to solve. It provides an engineered solution for positioning reliability of unmanned platforms in complex electromagnetic environments.
1. Limitations of Conventional GNSS Receivers in Strong Interference Environments
Before discussing the advantages of the HFD2101-2, it is necessary to first understand the real-world difficulties faced by conventional GNSS receivers.
No or Limited Anti-Jamming Capability
- Conventional receivers have no dedicated interference suppression module, and signal-to-noise ratio deteriorates rapidly when facing broadband noise or narrowband interference
- Pulse interference and swept-frequency interference can cause the receiver to repeatedly lose lock and reacquire, making positioning continuity impossible to guarantee
Performance Degrades Sharply Under Interference
- When the interfering signal power exceeds a certain threshold, the receiver may completely lose satellite signals
- Even if positioning is barely maintained, accuracy can degrade from metre-level to tens of metres or worse
Power Consumption and Size Hard to Balance
- Some receivers with anti-jamming capability have high power consumption and large size, making them difficult to integrate into small unmanned platforms
- Drones and unmanned surface vessels have strict limits on payload weight and power consumption, and conventional anti-jamming equipment often exceeds the budget
- These limitations are further amplified in complex electromagnetic environments – unmanned platforms may face multiple types of interference signals simultaneously during missions, placing higher demands on the receiver's anti-jamming capability.
2. HFD2101-2 Anti-Jamming Technology Analysis
The anti-jamming capability of the HFD2101-2 is built on three technical pillars: multi-type interference suppression, dual-system redundancy, and integrated design.
1. Multi-Type Interference Suppression – Covering Broadband, Narrowband, Pulse, and Swept-Frequency Interference
- Anti-jamming performance: ≥100dB (single interference), ≥90dB (three interferences)
- Interference type coverage: broadband, narrowband, pulse, and frequency swept interference signals
- Engineering value: In complex electromagnetic environments where multiple types of interference coexist, the receiver can still maintain stable positioning output, avoiding loss of lock caused by a single type of interference
2. Dual-System GNSS Support – Improving Positioning Redundancy
- Supported systems: GPS-L1 + BDS-B1I/B1C
- Engineering value: The two systems serve as backups for each other. When one system is interfered with, the other can provide backup positioning information, improving positioning continuity and availability
- Positioning performance: Horizontal accuracy 5m (1σ) , vertical accuracy 10m (1σ) , velocity accuracy 0.2m/s, update rate 10Hz
3. Integrated Design – Balancing Power, Weight, and Size
- Power consumption: ≤10W, significantly lower than conventional anti-jamming receivers
- Weight: ≤500g
- Dimensions: 100×100×32mm
- Interface: RS422 standard communication interface
- Engineering value: Adapts to the payload constraints of drones and unmanned surface vessels, facilitating integration into existing platforms
3. Performance Comparison: HFD2101-2 vs Conventional GNSS Receivers
| Comparison Dimension | Conventional GNSS Receiver | HFD2101-2 |
|---|---|---|
| Anti-jamming capability | Limited or none | ≥100dB (single interference), ≥90dB (three interferences) |
| Interference type coverage | No dedicated suppression | Broadband, narrowband, pulse, swept-frequency |
| Satellite systems | Single system (e.g., GPS only) | GPS-L1 + BDS-B1I/B1C dual system |
| Positioning accuracy | Accuracy degrades sharply under interference | Horizontal 5m, vertical 10m (1σ) |
| Velocity accuracy | - | 0.2 m/s (1σ) |
| Update rate | Typically 1-5Hz | 10Hz |
| Power consumption | Lower but no anti-jamming capability | ≤10W (including anti-jamming function) |
| Weight | Lighter | ≤500g |
| Operating temperature | Narrower | -40°C~+75°C |
| Interface | Various | RS422 standard interface |
From the comparison, it can be seen that the HFD2101-2, while maintaining low power consumption and light weight, raises anti-jamming capability to a level that conventional receivers find difficult to achieve. Its 10Hz update rate and 0.2m/s velocity accuracy also meet the real-time positioning requirements of drones and unmanned platforms.
4. Applicable Scenarios: Anti-Jamming Positioning in Unmanned Platforms
The anti-jamming technology of the HFD2101-2 has been engineered to adapt to the actual requirements of different unmanned platforms:
| Applicable Platform | Interference Challenges | HFD2101-2 Suitability |
|---|---|---|
| Fixed-wing UAV navigation systems | GNSS signals may be interfered with in complex electromagnetic environments | ≥100dB anti-jamming capability + GPS/BDS dual-system support ensure navigation continuity; ≤500g weight and ≤10W power consumption adapt to payload and endurance requirements |
| Unmanned surface vessels | Electromagnetic interference from shore-based equipment or other vessels | -40°C~+75°C wide-temperature operation adapts to outdoor and surface environments; compact size facilitates integration into vessel electronic cabins |
| Ground and vehicle-mounted platforms | Multiple interference sources in urban or industrial areas | Dual-system redundancy + 10Hz update rate meet real-time requirements; RS422 interface facilitates connection with vehicle-mounted systems |
Conclusion: Providing Reliable Positioning Solutions for Unmanned Platforms in Strong Interference Environments
The HFD2101-2 Integrated Anti-Jamming Receiver covers broadband, narrowband, pulse, and swept-frequency interference with an anti-jamming capability of ≥100dB (single interference) / ≥90dB (three interferences) , improves positioning redundancy with GPS-L1 + BDS-B1 dual-system support, and adapts to the payload constraints of unmanned platforms with ≤10W power consumption and ≤500g weight. It provides an engineered solution for maintaining positioning continuity in strong interference environments for fixed-wing UAVs, unmanned surface vessels, and ground vehicles.
For selection recommendations or to request samples based on your specific platform type (UAV, unmanned surface vessel, ground vehicle) and interference environment, please contact our technical team.
📧 Email: sales@shinhom.com
🌐 Website: www.shinhom.com/
🔗 Product Details & Inquiries: HFD2101-2 Integrated Anti-Jamming Receiver